Mara have armor debuff too. So 100% armor pene ? I check when back from work. But i think its imposible to have 100%.Bohavwn wrote: ↑Thu Jan 16, 2020 3:45 amFrom my understanding since WS is armor pen and PB is armor bybass it does not stack the same way. For instance with 50% armor pen from WS and PB, You first penetrate 50% of armor with WS then bypass the 50% of the remaining armor with PB equaling 75% armor negated instead of 100%
[Marauder] Invader 6 Peice
Moderators: Developer, Management, Web Developer
Forum rules
Before posting on this forum, be sure to read the Terms of Use
Your topic MUST start with your class name between hooks (IE : [Shaman] blablabla)
Before posting on this forum, be sure to read the Terms of Use
Your topic MUST start with your class name between hooks (IE : [Shaman] blablabla)
Re: [Marauder] Invader 6 Peice
Ads

 Posts: 558
Re: [Marauder] Invader 6 Peice
Anyone can explain difference between Penetration armor and Bypass armor please??wachlarz wrote: ↑Thu Jan 16, 2020 10:14 amMara have armor debuff too. So 100% armor pene ? I check when back from work. But i think its imposible to have 100%.Bohavwn wrote: ↑Thu Jan 16, 2020 3:45 amFrom my understanding since WS is armor pen and PB is armor bybass it does not stack the same way. For instance with 50% armor pen from WS and PB, You first penetrate 50% of armor with WS then bypass the 50% of the remaining armor with PB equaling 75% armor negated instead of 100%
IMHO  Mara armor debuff and bypass dont cooperate to good. If armor value is lover then armor bypass is decresed too. Example: 2000 armor  i can bypass 1000 armor, after armor debuff ( 1000 armor), bypass only 500 Armor . So WS > PB?
Re: [Marauder] Invader 6 Peice
Everything stacks: firstly your armor debuff is applied, then your 50% armor pen from PB, added to whatever armor pen you have from your weapon skill, acts on the remaining armor of your target. Then, on top of that, impale ignores extra armor if you hit the target from behind.Dajciekrwi wrote: ↑Thu Jan 16, 2020 10:48 amAnyone can explain difference between Penetration armor and Bypass armor please??wachlarz wrote: ↑Thu Jan 16, 2020 10:14 amMara have armor debuff too. So 100% armor pene ? I check when back from work. But i think its imposible to have 100%.Bohavwn wrote: ↑Thu Jan 16, 2020 3:45 am
From my understanding since WS is armor pen and PB is armor bybass it does not stack the same way. For instance with 50% armor pen from WS and PB, You first penetrate 50% of armor with WS then bypass the 50% of the remaining armor with PB equaling 75% armor negated instead of 100%
IMHO  Mara armor debuff and bypass dont cooperate to good. If armor value is lover then armor bypass is decresed too. Example: 2000 armor  i can bypass 1000 armor, after armor debuff ( 1000 armor), bypass only 500 Armor . So WS > PB?
Vrede Mara RR 82
Vredde Chosen RR 80
Vredith Blackguard RR 69
Vredde Chosen RR 80
Vredith Blackguard RR 69
Re: [Marauder] Invader 6 Peice
So make the math:ahorts wrote: ↑Thu Jan 16, 2020 12:53 pmEverything stacks: firstly your armor debuff is applied, then your 50% armor pen from PB, added to whatever armor pen you have from your weapon skill, acts on the remaining armor of your target. Then, on top of that, impale ignores extra armor if you hit the target from behind.Dajciekrwi wrote: ↑Thu Jan 16, 2020 10:48 amAnyone can explain difference between Penetration armor and Bypass armor please??
IMHO  Mara armor debuff and bypass dont cooperate to good. If armor value is lover then armor bypass is decresed too. Example: 2000 armor  i can bypass 1000 armor, after armor debuff ( 1000 armor), bypass only 500 Armor . So WS > PB?
Averange tank armor with pot no armor talis about 4.6k.I can armor debuff 1,500 so 3100k next 50% PB 1560k. My Ws is 47,7% +3% from inv helemt. So 1560k > 780 armor left. But i think this dont work like this.
First 47% Ws gives only 780 armor red. ?
Sec if i dont use armor pene from skill on tank so: 4,6k>50% Pb >2,3k >47% from WS >1,15 so better dont use armor pene skill ??
If first Ws calc. 4,6> 50% WS >2,3 then 1,5k from skill >800 and Pb 50%> 400 armor ? So Pb reduce 400 armor ?
If first Ws calc. 4.6>50% WS>2,3 next PB> 1,15k >armor debuff 1,5 > 350 armor ?
Re: [Marauder] Invader 6 Peice
Basicly it would look like this 4600 armor  1500 from cutting claw = 3100 left. 3100  1457 from ws armor pen = 1643  821 PB = 822 armor left for calculated mitigation from the hit. This is only if the target you are hitting has 0 reduced armor pen and more then likely a tank would have some sort of reduced armor pen. I believe reduced armor pen may count twice because of the 2 checks but i could be wrong. (this would have to be tested)wachlarz wrote: ↑Thu Jan 16, 2020 5:19 pmSo make the math:
Averange tank armor with pot no armor talis about 4.6k.I can armor debuff 1,500 so 3100k next 50% PB 1560k. My Ws is 47,7% +3% from inv helemt. So 1560k > 780 armor left. But i think this dont work like this.
First 47% Ws gives only 780 armor red. ?
Sec if i dont use armor pene from skill on tank so: 4,6k>50% Pb >2,3k >47% from WS >1,15 so better dont use armor pene skill ??
If first Ws calc. 4,6> 50% WS >2,3 then 1,5k from skill >800 and Pb 50%> 400 armor ? So Pb reduce 400 armor ?
If first Ws calc. 4.6>50% WS>2,3 next PB> 1,15k >armor debuff 1,5 > 350 armor ?
This is just armor mitigation though so if the high armor target is also stacking toughness you still won't see as big a hit as you do on light armor targets but it will be higher then just stacking str with no WS.
Trismack
Re: [Marauder] Invader 6 Peice
Are U read 3 last lines i write ? This cant be. So better dont use cutting claw and U will have MORE armor pene.Ekundu01 wrote: ↑Thu Jan 16, 2020 5:38 pmBasicly it would look like this 4600 armor  1500 from cutting claw = 3100 left. 3100  1457 from ws armor pen = 1643  821 PB = 822 armor left for calculated mitigation from the hit. This is only if the target you are hitting has 0 reduced armor pen and more then likely a tank would have some sort of reduced armor pen. I believe reduced armor pen may count twice because of the 2 checks but i could be wrong. (this would have to be tested)wachlarz wrote: ↑Thu Jan 16, 2020 5:19 pmSo make the math:
Averange tank armor with pot no armor talis about 4.6k.I can armor debuff 1,500 so 3100k next 50% PB 1560k. My Ws is 47,7% +3% from inv helemt. So 1560k > 780 armor left. But i think this dont work like this.
First 47% Ws gives only 780 armor red. ?
Sec if i dont use armor pene from skill on tank so: 4,6k>50% Pb >2,3k >47% from WS >1,15 so better dont use armor pene skill ??
If first Ws calc. 4,6> 50% WS >2,3 then 1,5k from skill >800 and Pb 50%> 400 armor ? So Pb reduce 400 armor ?
If first Ws calc. 4.6>50% WS>2,3 next PB> 1,15k >armor debuff 1,5 > 350 armor ?
This is just armor mitigation though so if the high armor target is also stacking toughness you still won't see as big a hit as you do on light armor targets but it will be higher then just stacking str with no WS.
Re: [Marauder] Invader 6 Peice
No cause not using cutting claw would leave them with higher armor.wachlarz wrote: ↑Thu Jan 16, 2020 6:59 pmAre U read 3 last lines i write ? This cant be. So better dont use cutting claw and U will have MORE armor pene.Ekundu01 wrote: ↑Thu Jan 16, 2020 5:38 pmBasicly it would look like this 4600 armor  1500 from cutting claw = 3100 left. 3100  1457 from ws armor pen = 1643  821 PB = 822 armor left for calculated mitigation from the hit. This is only if the target you are hitting has 0 reduced armor pen and more then likely a tank would have some sort of reduced armor pen. I believe reduced armor pen may count twice because of the 2 checks but i could be wrong. (this would have to be tested)wachlarz wrote: ↑Thu Jan 16, 2020 5:19 pmSo make the math:
Averange tank armor with pot no armor talis about 4.6k.I can armor debuff 1,500 so 3100k next 50% PB 1560k. My Ws is 47,7% +3% from inv helemt. So 1560k > 780 armor left. But i think this dont work like this.
First 47% Ws gives only 780 armor red. ?
Sec if i dont use armor pene from skill on tank so: 4,6k>50% Pb >2,3k >47% from WS >1,15 so better dont use armor pene skill ??
If first Ws calc. 4,6> 50% WS >2,3 then 1,5k from skill >800 and Pb 50%> 400 armor ? So Pb reduce 400 armor ?
If first Ws calc. 4.6>50% WS>2,3 next PB> 1,15k >armor debuff 1,5 > 350 armor ?
This is just armor mitigation though so if the high armor target is also stacking toughness you still won't see as big a hit as you do on light armor targets but it will be higher then just stacking str with no WS.
4600 armor  WS armor pen 2162 = 2438 armor  50% from PB = 1219 armor.
Edited  I think you are adding and not multiplying. Once the armor is reduced by WS you can only apply PB reduction to the remaining armor after the ws reduction. Anything that reduces armor by a flat amount is done first then WS reductions are done based on what is left and PB reduction is done on what is left after the flat reduction and ws reduction.
This is why on light armor targets the % based bypasses do less for you and stacking more str wins out.
Trismack
Who is online
Users browsing this forum: No registered users and 1 guest