[quote=mytreds post_id=397999 time=<a href="tel:1584468016">1584468016</a> user_id=292050]
None of the addons appear in my addon list. None of the commands work. I installed as instructed.
Hey,
it doesn't looks like this?
It does not. I am assuming something is not in the correct folder.
Hey,
yep, this could be.
Make sure you have one Interface and one AddOns folder.
Delete the cache folder (after restart the launcher, a new one will be made automatically).
I hope you will find the problem. Good luck!
Do any of the unzipped files belong in the Addon folder?
kahhqt wrote: ↑Tue Mar 17, 2020 9:54 pm
Hi all, nice UI! I've been toying with the settings and it seems like everything works, except when I switch profiles for other toons, everything except my Pure healthbar settings copy over. The Pure settings only seem to include configurations for the healthbars and nothing for default profiles or the like. Any tips? When logging in, system general chat tells me that the Pure Active Profile that is being initialized is "local" - maybe that has to do with it?
Another question: difference between the Order and Destruction profiles in the files? Have been toying with my WP's UI but want to use it for my Destro toons as well, will this bring trouble down the road?
Thanks!
hey,
the difference between the destro and the order profiles are, as far as I know, it's the enemy/buffhead setup for special destro buffs and order debuffs (in case of destro heal UI setup).
to your main problem
How did you set up the profiles? did you checked the "sharing" box?
Thanks for the help - I did check the sharing box, but the problem seems to be only with the Pure addon since all other addons/addon settings get copied over when I switch UI profiles on a new toon. It's just Pure that remains in the default position with the default settings, where the UI of the character that is being shared with the new toon has Pure settings that have been changed to my liking. Any ideas?
Re: [UI] VinyUI
Posted: Wed Mar 18, 2020 6:46 am
by mytreds
I got it to work, thank you for your assistance
Re: [UI] VinyUI
Posted: Wed Mar 18, 2020 8:08 am
by GTDakuL
If i want this addon pack i must download from 1st page? or is here onather updated one? i dont wanna check all 75 pages..
Re: [UI] VinyUI
Posted: Wed Mar 18, 2020 9:23 am
by emiliorv
GTDakuL wrote: ↑Wed Mar 18, 2020 8:08 am
If i want this addon pack i must download from 1st page? or is here onather updated one? i dont wanna check all 75 pages..
kahhqt wrote: ↑Tue Mar 17, 2020 9:54 pm
Hi all, nice UI! I've been toying with the settings and it seems like everything works, except when I switch profiles for other toons, everything except my Pure healthbar settings copy over. The Pure settings only seem to include configurations for the healthbars and nothing for default profiles or the like. Any tips? When logging in, system general chat tells me that the Pure Active Profile that is being initialized is "local" - maybe that has to do with it?
Another question: difference between the Order and Destruction profiles in the files? Have been toying with my WP's UI but want to use it for my Destro toons as well, will this bring trouble down the road?
Thanks!
hey,
the difference between the destro and the order profiles are, as far as I know, it's the enemy/buffhead setup for special destro buffs and order debuffs (in case of destro heal UI setup).
to your main problem
How did you set up the profiles? did you checked the "sharing" box?
Thanks for the help - I did check the sharing box, but the problem seems to be only with the Pure addon since all other addons/addon settings get copied over when I switch UI profiles on a new toon. It's just Pure that remains in the default position with the default settings, where the UI of the character that is being shared with the new toon has Pure settings that have been changed to my liking. Any ideas?
Hey,
okay, so maybe try this.
Go to: ror - user- settings - MartyrsSquare - origin profil - origin profil (origin profil = the profile where the pure setup works properly)
scroll down to your Pure folder -> copy
Then: ror - user- settings - MartyrsSquare - new profil - new profil (new profil = the profile where you want the copied pure setup)
scroll down and delete the Pure folder -> paste the copied one
AND: delte your cache folder (a new one will be created after you are starting the launcher/game again)
Good Luck!
Re: [UI] VinyUI
Posted: Thu Mar 19, 2020 9:35 am
by Superdupertavia
Hey! Thank you so much for making this UI kit, very easy to install and get running. ATM I'm unable to sort out how to change my party unitframe's from squares into the rectangles pictured in the original post. Picture for reference.
I've tried adjusting unit frames through the enemy config but I can't quite figure it out. Editing the layout via the user settings only lets me adjust the anchor as well. I'm at a bit of a loss and would appreciate any help in figuring this out! Thanks!
Re: [UI] VinyUI
Posted: Thu Mar 19, 2020 10:46 am
by Lilim
Spoiler:
Superdupertavia wrote: ↑Thu Mar 19, 2020 9:35 am
Hey! Thank you so much for making this UI kit, very easy to install and get running. ATM I'm unable to sort out how to change my party unitframe's from squares into the rectangles pictured in the original post. Picture for reference.
I've tried adjusting unit frames through the enemy config but I can't quite figure it out. Editing the layout via the user settings only lets me adjust the anchor as well. I'm at a bit of a loss and would appreciate any help in figuring this out! Thanks!
Hey,
well, I think you are a tank and choose the tank layout.... so actually, that's what the default VinyUI tank layout looks like.
There are several ways to change the layout, but none of them are really easy. So we do the save solution...I hope so
To change the layout, you have to go to Enemy - Configuration - Unit Frames - Visual Parts
so this is an example from my layout (similar to the front page pic), but I will show you where to change the settings.
It's important to to adjust the size on almost all Visual Parts (Selection/ Background and so on).
It is a bit trial and error...but you will handel it!
Re: [UI] VinyUI
Posted: Thu Mar 19, 2020 10:52 am
by Superdupertavia
Thanks! I can work with this! That did it!
Re: [UI] VinyUI
Posted: Sat Mar 21, 2020 9:31 am
by KeyGee
Hey, I just started playing a healer and I can't figure out how to get buffs like a HoT show on on the party frames. It works great with buffhead that the HoT is shown on their head, but how do I make it show on the party frames?
Also, the addon "Moth" mouse over target hover doesn't seem to work, or at least it doesn't work like I thought it would. I can't just hover over the party frames and push my heals, I actually have to left-click and target them first. Is there a way so I only have to hover over them?
