T2/T3 Bolster

Share your ideas and feedback to help improve the game.
Forum rules
Before posting in this forum, please read the Terms of Use.

This section is for providing feedback and sharing your opinions on what could be improved or changed for the Return of Reckoning project.

To ensure your feedback is as helpful as possible, please review the Rules and Posting Guidelines before posting.
User avatar
blaqwar
Posts: 471

T2/T3 Bolster

Post#1 » Fri Dec 09, 2016 6:32 pm

Something is clearly wrong with it, I'll point you to the images below. This is the damage of a R20/21 Engi (similar RR) in Obliterator set and green gear from the RvR vendor on a R19 and 24 SHs.

Image

Image

Image

The damage the Engineer received for comparison:
Image

Their mitigation is minimal, probably because weapon skill value skyrockets under bolster. Even ignoring the mitigation values the damage of the abilities alone is crazy. Not just Crack Shot but Hip Shot and Gun Blast as well. The damage received on the other hand is minimal, since I was sporting around 70% armor mitigation at R20 thanks to the bolstered value of Flak Jacket, in addition their abilities themselves do the tenth of the damage mine did.

Mind you this was not just against these two characters, it was pretty much anyone I encountered. Granted I didn't fight anyone near my level.

Judging by my experience in the last few days of RvR in T2/T3 I would say that there is something wrong with the bolster scaling at the moment. Since I haven't tested any other careers in this tier it is possible this is only affecting Engineers due to the interaction with Improvised Upgrades. Can anyone contribute their observations? Is my character bugged?

Ads
Sulorie
Posts: 7461

Re: T2/T3 Bolster

Post#2 » Fri Dec 09, 2016 6:49 pm

Maybe the value of buffs is bolstered too, like flak jacket being twice as strong?
Have you done the math for armor and checked .getstats with the value of armor you should theoretically have?
Dying is no option.

User avatar
blaqwar
Posts: 471

Re: T2/T3 Bolster

Post#3 » Fri Dec 09, 2016 7:03 pm

Flak Jacket value get's upped to 504 armor atm. I haven't checked any armor value and right now it's normalising around level 22. It's not that big of an issue since there's a possibility that all the people I fought were just itemising/speccing/playing badly.

What's more worrying is that my damage was insane.

Edit: Bolster tells me I'm getting bolstered to lvl 39. Which could explain the anomalies.

User avatar
eks
Posts: 69

Re: T2/T3 Bolster

Post#4 » Fri Dec 09, 2016 7:22 pm

blaqwar wrote: Edit: Bolster tells me I'm getting bolstered to lvl 39. Which could explain the anomalies.
I imagine this combined with the fact that lots and lots of people in t2-3 are in t1 gear is probably what's happening. Big crits against almost zero mitigation. That's my guess.
Image
Doutin Tomasson, Runepriest - Bitterstone Thunderers
Tomservo Rowsdower, Engineer
Roi, KotBS
Eks, Zealot

User avatar
blaqwar
Posts: 471

Re: T2/T3 Bolster

Post#5 » Fri Dec 09, 2016 7:40 pm

Shouldn't their gear be somewhat irrelevant considering everyone should be getting bolstered to R39? Or am I alone in this and somehow bugged?

User avatar
eks
Posts: 69

Re: T2/T3 Bolster

Post#6 » Fri Dec 09, 2016 7:47 pm

blaqwar wrote:Shouldn't their gear be somewhat irrelevant considering everyone should be getting bolstered to R39? Or am I alone in this and somehow bugged?
I could be wrong about this, but I thought their Armor was one of the things not getting buffed by bolster, while your ability damage from rank plus Ballistic Skill plus armor pen from Weapon Skill would be getting buffed from Bolster. Any Bolster they get to Toughness would kinda pale in comparison, especially for squishy classes. Very few in t1-3 stacking Armor with talis or pots.
Image
Doutin Tomasson, Runepriest - Bitterstone Thunderers
Tomservo Rowsdower, Engineer
Roi, KotBS
Eks, Zealot

User avatar
Dresden
Banned
Posts: 1395

Re: T2/T3 Bolster

Post#7 » Sat Dec 10, 2016 4:30 am

This new change is VALUABLE, it will (and already has from the numbers i've seen) revive T2-T3 as a THING, we must just provide feedback and be patient.

And this is coming from ME, i am the LAST person on this server willing to agree with Azarael.

Debolster Info - 03/12/16 Change
. -= Cult Of Chaos =- GUILD -= Cult Leader =- . -= Kagaz Wrathson - The Decioblidevannihilator - Black Orc =- .
. -= Dresden RoR Info - 4 pins and counting! =- . #WAAAGH ^_^ #AllSilenceIsGolden @_Q

User avatar
blaqwar
Posts: 471

Re: T2/T3 Bolster

Post#8 » Mon Dec 19, 2016 7:24 pm

It seems that the bolster strength has normalised around level 26/27 on my Engineer, the damage I take is much closer to normal and the damage I deal has gone down a bit. This combined means that I can no longer solo 2-3 people effortlessly.

However my rank 20 Witch Hunter seems to be on the other end of the spectrum, at a point where my executions hit on cloth for less than the enemy auto attacks hit me. Strength is around 600 bolstered, armor pen around 40% yet the character itself does similar damage to that of Squig Herder pet.

This unfortunately isn't an issue of "git gud" as the character seems to have retained damage of T2 from before the change, has decent gear and the damage of the abilities themselves have nothing to do with skill.

T2/T3 Bolster is very much out of whack and needs refining.

Ads
User avatar
spikespiegel84
Posts: 303

Re: T2/T3 Bolster

Post#9 » Wed Dec 21, 2016 7:59 am

I still remember getting literally butchered with my back then lvl 24 We by a lvl 16 kotbs. My ego is still under the shower, crying.
Image

User avatar
BrockRiefenstahl
Posts: 409

Re: T2/T3 Bolster

Post#10 » Wed Dec 21, 2016 8:49 am

blaqwar wrote:
Spoiler:
Something is clearly wrong with it, I'll point you to the images below. This is the damage of a R20/21 Engi (similar RR) in Obliterator set and green gear from the RvR vendor on a R19 and 24 SHs.

Image

Image

Image

The damage the Engineer received for comparison:
Image

Their mitigation is minimal, probably because weapon skill value skyrockets under bolster. Even ignoring the mitigation values the damage of the abilities alone is crazy. Not just Crack Shot but Hip Shot and Gun Blast as well. The damage received on the other hand is minimal, since I was sporting around 70% armor mitigation at R20 thanks to the bolstered value of Flak Jacket, in addition their abilities themselves do the tenth of the damage mine did.

Mind you this was not just against these two characters, it was pretty much anyone I encountered. Granted I didn't fight anyone near my level.

Judging by my experience in the last few days of RvR in T2/T3 I would say that there is something wrong with the bolster scaling at the moment. Since I haven't tested any other careers in this tier it is possible this is only affecting Engineers due to the interaction with Improvised Upgrades. Can anyone contribute their observations? Is my character bugged?
I got killed as BG by a lvl 20 engi with bolstering (it was Highpass). Stats ~70+% armor but only like 50dps decrease from toughness.
I ran at him (1v1) He just sets up his Turret, (I believe it was bolstered to lvl 33) and he Facetanked me. Well... <10 seconds later he had 25% HP left and I was shot to death, even with my Selfshields and additional toughness buff etc... The turret is fu*king ticking with minimum 180(already minus Mitigation) at some salvo and up to 250 with the other turret attacks + its like a chaingun lol... Add all his own attacks on top of it and voilla (vs Heavy Armour).... People say "Magus is better overall cuz maaagic damage...) You don't need magicmushrooms as Engi.

Now I totally understand, why in lower Tiers every day some Destru's scream: Devs are order Biased. This aint looking right :-P
(Aside that, I dont think like that, but still Engi looks freaking overpowered in lower Tiers! Almost as fu*ked up as AM/Shaman AP drain lowskill- I hide at WC-Guards if i mess my #easymodegameplayup)

Who is online

Users browsing this forum: Angstar and 11 guests